RLF RETURN LINE FILTER SERIES

The RLF series filter is installed at the return oil pipeline of the hydraulic system to remove metal powder and rubber material from the wear of various components in the oil, so as to keep the oil flowing back to the tank clean.

The filter element of this filter is made of synthetic fiber filter material, which has the advantages of high filtration accuracy, large oil flow capacity, small initial pressure loss, and large pollutant capacity. It is also equipped with a differential pressure transmitter and a bypass valve. When the filter element is clogged and the pressure difference between the inlet and outlet is 0.35MPa, a switch signal is sent out, and the filter element should be replaced at this time; If the machine cannot be stopped immediately or no one comes to replace the filter element, the bypass valve installed on the upper part of the filter element will automatically open to protect the system.

There are many models of this RLF filter, and RLF-60 × * p is the one shown in the picture, which represents the RLF series return line filter with a nominal flow rate of 60L/MIN. *For filtering accuracy. If the medium used is water ethylene glycol, with a pressure of 1.6 MPa, a nominal flow rate of 60 L/min, a filtration accuracy of 10 μ m, and a transmitter. The filter model is RLF · BH-H60 × 10P, and the filter element model is SFX · BH-60X10

Our production line equipment is engineered with high precision, featuring advanced components sourced from top-tier manufacturers. It is designed to handle a wide range of oil filter types and sizes, ensuring flexibility and adaptability to diverse production requirements. The equipment is built with durable materials to guarantee long-term stability and reliability.

Thank you for reading. Looking forward to the opportunity to collaborate with you.