TF Tank Mounted Suction Filter Series

1. Easy installation and connection, simplifying system pipelines

This filter can be directly installed on the side, bottom or top of the fuel tank. The filter source is exposed outside the fuel tank. The oil suction unit is immersed below the liquid level in the fuel tank. The oil outlet is equipped with pipe and flange connections.The filter is equipped with devices such as self-sealing valves, which eliminates the need to install stop valves and other pipe fittings in the pipeline, thus making the

The pipeline is simplified and installation is easy.

2. Set up a self-sealing valve to make it very convenient to replace, clean the filter element or repair the system:

When replacing or cleaning the filter element or repairing the system, you only need to unscrew the filter end cap (cleaning cap). At this time, the self-sealing valve will automatically close to isolate the oil path of the tank so that the oil in the tank will not flow out, thereby making cleaning and replacement possible. The filter element or maintenance system is very convenient. If the self-sealing valve is opened, it can also be used to drain oil from the fuel tank.

3.It has a source core pollution transmitter and an oil bypass valve, which improves the reliability of the hydraulic system: when the filter core is blocked by pollutants and the vacuum degree of the oil outlet reaches 0.018MPa, the transmitter will send out a signal and the system should Replace or clean the filter element promptly. If the machine cannot be shut down immediately or no one comes to replace the filter element, the oil bypass valve on the upper part of the filter element will automatically open (opening value: vacuum 0.02MPa) to avoid air suction failure in the oil spring. However, at this time, the machine should be stopped to replace or clean the filter element to maintain the cleanliness of the hydraulic system and improve the reliability of the hydraulic system.